A sharp lawn mower is essential to keep your lawn as beautiful as possible. Sharp blades have various properties, such as not being harmful to your grass and doing a better job than dull blades. Lawn mower blades easily become less efficient because of the grass’s many silicate particles that dull the blades easily. Dulls and damaged blades can cause grass damage. You can easily sharpen your blades with some tools, some know-how, and some effort.
But the question is, can you sharpen lawn mower blades without removing them?
Yes, it can sharpen the lawn mower blades without removing them. You can also sharpen it by removing the blade, but if it is inappropriate for you, you can do it without removing it.
Method to sharpen lawn mower blades without removing them
Switch off the supply
Safety is the most important and common thing. Unplug the lawn mower from the power supply. You should disconnect the spark plug if you have a gas lawn mower. Do not switch it on while sharpening.
And gloves and goggles.
Put on goggles for eye safety and also use safety gloves. Your safety is more important than anything else.
Gather the required tools
You can find special lawn mower sharpening tools for your convenience. You can find them online as well as in the market. Experts may use different tools to sharpen these blades, such as an angle grinder with a metal blade.
Tilt the mower
Now tilt the mower on its side. To do work carefully, you can put it on a wooden block.
Clean lawn mower blades
To remove debris, you can use soapy water and a rag to clean the blade. You can use a steel wire brush for stuck-on-grime, but be careful during this process. You should sharpen your blades after cleaning them.
Sharpen the blades
Keep the electric or handheld grinder at an angle to work. Start sharpening and take your time to sharpen one side of the blade, and after that, switch to the other side. Do not go back and forth and move only in one direction smoothly; make sure you sharpen the blade’s top face.
Lower the mower
Now you can lower the mower back to its original starting point. Now your work is completed and you can plug the mower and unseal the tank.
Useful tips for sharpening lawn mower blades
- Before doing anything, you should know the most effective tips and tricks. This will be very helpful to you. Some important things are mentioned here that will be useful for you.
- After making sure you grind the blades to avoid fuel loss, the blades should be sharpened when the gas tank is empty.
- The blades should be well balanced; if they are not, they will cause noises from below the lawn mower’s deck. Blades are improperly balanced due to blunt blades and a wallowed-out driveshaft hole.
- You should know when to sharpen your blades or when to replace them.
- Bent, out-of-balance blades are damaged blades.
- What is the fastest and easiest way to sharpen your lawn mower blade?
- A bench grinder is a fast and easy way to sharpen the lawn mower blade. It will be useful to sharpen the blade in a few minutes, but they cause sparks and are also loud. So it would help if you protect yourself by wearing gloves or goggles. Then start grinding the edge of the blade against the spinning wheel.
When should you replace your lawn mower blades?
You should replace them annually. A blunt blade can be sharpened at home. But if they get serious damage, you should replace them.
Should you sharpen lawn mower blades?
It will help if you sharpen your lawn mower blades when they do not work properly. Dull blades can cause the grass to lose its ability to retain water and become more prone to diseases. Some lawnmowers should be sharpened after 25 hours of use.
How can you know that lawn mower blades need to be sharp?
Some signs will be helpful to you to know about blunt lawn mower blades.
- You can not get even the grass cut with blunt mower blades. They will leave the grass rough and uneven. Sharp blades can cut the grass at the same height. If you notice a rugged cut, it is a sign that you should sharpen your blades.
- The most important sign of blunt mower blades is the blade appearance. If your lawn mower blades have dents or nicks bent at certain points, they need to be sharpened or replaced.
- Dull blades can collect a lot of debris that causes engine damage.
- A jagged edge on the cut grass indicates that your mower blades are blunt. They are not providing a clean cut.
- Grass color will also be affected if the blades are blunt.
- If your lawn mower blades are blunt, you will need more effort to complete your work. It will make your work difficult to complete.
- A blunt blade can disturb grass and soil.
What will happen if you don’t sharpen lawn mower blades?
You can’t get the best results if you don’t have sharp lawn mower blades, even if the blades are dull. Dull blades will slow your mower, leaving the lawn susceptible to withering and browning.
How can you know that lawn mower blades are sharp?
Blades should be as sharp as a bitter knife and at an angle of 30 degrees.
What do your lawn mower blades look like after sharpening?
They should be sharp enough to do their job better. They have a shiny edge after sharpening. The blade will be free from nicks, bends, scratches, and defects.
